Convert Normal MXF Files to ProRes for FCP

Tutorials that use the MapActivity. Many using GPS functionality.

Convert Normal MXF Files to ProRes for FCP

Postby ame001 » Wed Jul 10, 2013 8:13 am

MXF File to ProRes for FCP

ProRes is not a video format used for practical or end-user viewing, it is just a line of intermediate codec, and we can classify it as a lossy video compression format. The ProRes is developed by Apple and it is intended for use during video editing. Compared with other uncompressed video and end-user codecs ProRes requires much less expensive disk systems and retains higher quality. If you want to edit videos with FCP, Prores is a pretty good choice.

As we know, many popular video cameras generate MXF files, but MXF is not compatible with FCP, so if you need to edit MXF files with FCP, the video format has to be changed. Just as the introduction about ProRes above, people can convert MXF to ProRes for FCP. And if you do so, there is no doubt that the post production will satisfy you.

The Mac MXF to ProRes 422 Converter is a professional MXF converter just designed for use of converting MXF files to PreRes. This MXF to ProRes Converter for Mac is very easy to use, just spend few minutes on it, then people can handle it very well. And also this Mac MXF to ProRes 422 Converter can convert MXF files to ProRes in a very short time.

With the help of Mac MXF to ProRes 422 Converter, people can freely convert any MXF files to ProRes and edit ProRes videos with FCP. After editing ProRes files with FCP, the post production will never make you down.

http://www.anymediaeditor.com/convert-m ... prores.php


Step by step guide to help you convert mxf file to ProRes for Final Cut Pro

Step 1:Add mxf file into Mac MXF to ProRes Converter
Install and run Mac MXF to ProRes Converter, select the mxf files and add them into MXF to ProRes Converter for Mac.
Image

Step 2:Set Output format: .mov.
Set output format that you need, here choose Final Cut Pro -> Apple ProRes 422 (HQ) (*.mov).

Step 3:Start Conversion
Click the "Convert" button to convert mxf file to ProRes .mov, just a few minutes, you can finish the conversion.

Step 4:Import mxf files into FCP
Run Final Cut Pro App, and import the conversion video into your FCP for editing directly.

http://www.anymediaeditor.com/convert-m ... prores.php
ame001
Master Developer
Master Developer
 
Posts: 278
Joined: Mon Jul 01, 2013 3:15 am

Top

Re: Convert Normal MXF Files to ProRes for FCP

Postby ame001 » Tue Jul 16, 2013 4:20 am

Panasonic MXF to QuickTime - How to Convert Panasonic HVX200 MXF to MOV


Panasonic HVX200 MXF File to Mov for Mac

The HVX200 gives the new user a challenge to sink or swim, because it thrusts you into deep water. But if you have ever shot with DVX100, you can handle the HVX quite well. This Panasonic HXV200 can fulfill the demands of nearly any professional videographer. As a powerful camcorder HVX200 deeply loved by many people. But there is one thing bothers people, that is Panasonic HVX200 generates MXF files and MXF is not compatible with QuickTime.

The QuickTime is a great video player, and it is free for Mac users. People like it, and it is very convenient for using. However it doesn't support MXF files, that really boring. But is there is any way to solve that problem? Can we make some change so that QuickTime can play Panasonic HVX200 MXF files? The answer is yes, and what we need is just one MXF to MOV converter For Mac. We just need to convert Panasonic MXF files to QuickTime .MOV, then we can play any video we shot with HVX200 on QuickTime. But before that we have to decide what MXF to QuickTime converter we should choose. Because some MXF converter will disappoint you with awful output mess.

As my opinion, the professional Panasonic HVX200 MXF to QuickTime .MOV Converter for Mac is a good choice. This HVX200 MXF to QuickTime Converter is just designed for such occasion, aimed to convert Panasonic HVX200 MXF to QuickTime.MOV so that people can play HVX200 MXF files with QuickTime. And the most important point is that the Panasonic HVX200 MXF to QuickTime .MOV Converter for Mac can preserve the original video quality perfectly. And this HVX200 MXF to QuickTime Converter is very easy to use, it can convert Panasonic MXF to QuickTime .MOV at a amazing fast speed.

http://www.anymediaeditor.com/convert-m ... me-mov.php


Step by step guide to help you convert Panasonic HVX200 mxf file to QuickTime .mov

Step 1:Add mxf file into Mac Panasonic HVX200 MXF to Mov Converter
Install and run Mac Panasonic HVX200 MXF to Mov Converter, select the mxf files and add them into MXF to Mov Converter for Mac.
Image

Step 2:Set Output format: .mov
Set output format that you need, here choose QuickTime .mov.

Step 3:Start Conversion
Click the "Convert" button to convert mxf file to QuickTime .mov, just a few minutes, you can finish the conversion.

http://www.anymediaeditor.com/convert-m ... me-mov.php
ame001
Master Developer
Master Developer
 
Posts: 278
Joined: Mon Jul 01, 2013 3:15 am

Convert Canon XF105 MXF File into FCP 6 Native Structure

Postby kayla » Thu Oct 17, 2013 9:14 am

"I'm using a converter to convert files off of a Canon XF105. I get video, but the audio is extremely muted. I'm trying to convert the .MXF file into a FCP 6 native structure

. Thanks for the help."


MXF files could not be directly imported into Final Cut Pro. The native format for Final Cut Pro is Apple ProRes mov, so you need to [url=http://www.aunsoft.com/transmxf-

mac/]convert MXF file to Apple ProRes for importing into FCP 6[/url]. Considering that, Aunsoft TransMXF for Mac is the best choice to make MXF acceptable for FCP 6.

Aunsoft TransMXF for Mac is profession in dealing with MXF/P2 MXF problems. It could easily convert MXF files to various SD/HD videos for different usage. With Aunsoft

TransMXF for Mac, you can enjoy your MXF file on your phones, tablets, TVs or uploading to the Internet. You can use the MXF file in editing software like Final Cut Pro,

iMovie, Sony Vegas, Adobe Premiere, etc. Aunsoft TransMXF supports special format Apple ProRes for editing in FCP. It is the best solution for MXF/P2 MXF format

problems.

Convert Canon XF105 MXF to Apple ProRes 422 for FCP 6

Image

Step 1: Import source MXF file into MXF to FCP Converter.

Download Aunsoft TransMXF for Mac, install and launch it. Click "Add video" or "Add from folder" to load in source Canon XF105 MXF file. You can preview the MXF file in

the right side of the interface before converting.

Step 2: Choose "Apple ProRes 422 (HQ) (*.mov)" as output format.

Choose "Final Cut Pro" then "Apple ProRes 422 (HQ) (*.mov)" as output format for importing into Final Cut Rro 6 without problem. Click "Settings" to set the output video and

audio options like size, bitrate, frame rate, etc.

Image

Step 3: Convert MXF to Apple ProRes 422 mov.

Choose location for output mov video and click "Start conversion". With little time, you will get the output video with perfect video and audio synchronization[/url]. Click "Open"

to find your video and you are able to use it in Final Cut Pro 6.
kayla
Developer
Developer
 
Posts: 49
Joined: Fri Jul 19, 2013 8:57 am

Top

Return to Map Tutorials

Who is online

Users browsing this forum: No registered users and 1 guest